Page 1 of 1
Anyone recommend a Dishwasher Engineer ?
Posted:
Sun Jun 02, 2019 6:54 pmby Shiva
OK I have Bosch slimline dishwasher, showing Error Code 15 which the manual indicates is a technical issue. Can anyone recommend a dishwasher engineer? It's only about 10 months old but I didn't buy it directly , had it installed when I was getting some work done so I can't ask the shop or suchlike. Hate not having my dishwasher! Can anyone help?
Re: Anyone recommend a Dishwasher Engineer ?
Posted:
Sun Jun 02, 2019 11:12 pmby fireblade900
Hi
Error code 15 is usally water has entered the base panel and activated the anti flood switch.
The first thing to do is empty the water from the base panel ..around a pint or so.
1....Disconnect from the mains electrical supply.
2....The dishwasher should be allowed to be tilted backwards around 45 deg allowing the water seep out. leave in this position for about 5 mins.
3....Restart the dishwasher.
4...If this works great ....if after a few washes it shows E15 again...then you have an internal leak.
Hope this helps
Re: Anyone recommend a Dishwasher Engineer ?
Posted:
Mon Jun 03, 2019 9:01 amby Shiva
fireblade900 wrote:Hi
Error code 15 is usally water has entered the base panel and activated the anti flood switch.
The first thing to do is empty the water from the base panel ..around a pint or so.
1....Disconnect from the mains electrical supply.
2....The dishwasher should be allowed to be tilted backwards around 45 deg allowing the water seep out. leave in this position for about 5 mins.
3....Restart the dishwasher.
4...If this works great ....if after a few washes it shows E15 again...then you have an internal leak.
Hope this helps
Re: Anyone recommend a Dishwasher Engineer ?
Posted:
Mon Jun 03, 2019 9:06 amby Shiva
Whoops, don't know what happened there, my reply ( in message above) disappeared. Anyway, thanks, it has reset itself this morning so if it was water it must have drained away overnight. Will see how it goes. To be honest I can't even slide the machine out ( I tried...weakling! ) so it would still be good to know of an engineer for future issues....